Parameters：

Three Parameters：SPO2、TEMP(Optional)、Pulse Rate.

Waveforms：SPO2 waveform-PLETH

Features：

1. Compact, small, light, easy for carrying and handling;

2. LCD display of measurement and LCD display of PLETH;

3. Audio and visual alarm；

4. Storage and review of patient’s trend data up to 36 hours which is never lost even when power’s off;

5. Three kinds of power supply, AC Power, Build-in rechargeable Ni/MH battery and Common AA alkaline or rechargeable batteries;

6. Battery capacity indicator;

7. Automatic power-off；

8. Patient’s trend can be transmitted to a personal computer for display，saving and printing；

9. Suitable for adult, pediatric, and neonate patients;

Applications：

Table Pulse Oximeter can be applied in the hospital’s operation room, ICU, clinic section office, Out-patient department, sickroom and emergency treatment.

Standard Packing List：

Tabletop Pulse Oximeter main unit 1pc

Adult finger SpO2 sensor 1pc

AC power adaptor 1pc

Communication cable 1pc

The operator’s manual 1pc

Selectable Accessory:

Surface TEMP probe

Child finger/toe SpO2 sensor

Technical specification

1.General

Monitoring Parameters: SpO2、PR、PLETH、Pulse strength、TEMP(Optional)

Signal sockets：SpO2 socket、PR socket、TEMP socket(Optional)、adaptor socket、PC communication socket

Display screen:           

Type: 128×64 dot matrix homochromy LCD and Dual-color LED (red/green)

LCD Display area: 46mm×32mm

LED Display area: 35mm×58mm

Backlight color: White

LED: Dual-color LED (red/green) and homochromy LED

2. Features

PLETH: The monitor can display PLETH waveform

Audio and visual alarm: The speaker sounds the alarm and the parameter’s measurement flashes on the screen.

Prompting: Icons of battery capacity, pulse sound switch and alarm sound switch.

Power saving: The monitor will automatic shut down when no monitoring for 3 minutes.

Trend: The monitor saves parameter measurements every 2 seconds and can store trend data up to 36 hours.

Data storage: The saved data will never be lost even if the monitor is powered off.

Communication: Transmitting the patient’s trend to a PC for display, observation, saving and printing.

3. Electrical specifications

Working Voltage: DC 6.0V～9.0V

AC power adaptor      

Input: AC 100～240V, 50/60Hz, 0.7A

Output: DC 5V，3A

Internal battery             

Type: 1.5Ahr/8.4V Li rechargeable battery

Run Time: 15-hour continuous operation with a new, fully charged battery (environment temperature is 25℃)

Recharge time: 5 hours

Common 1.5V Battery

Type: Five pieces of common 1.5V AA battery or rechargeable battery

Run Time: More than 5-hour continuous operation with a new battery (environment temperature is 25℃)

4. Environment

Temperature

Operation：0°C ~ 45 °C 

Transportation and storage：-20 °C ~ 60 °C

Humidity

Operation：15% ~95 %(non-condensing)  

Transportation and storage：10% ~ 95 % (non-condensing)  

Altitude

Operation：86KPa~106KPa

Transportation and storage：50KPa~106KPa

5. Parameter Specifications

SpO2：

Patient: Adult, child and neonate

Range：35%~100%

Resolution：1 %

Accuracy:±2 %(70% ~100%), Unspecified (0%~ 69%)

PR ：

Range：30 bpm~250bpm

Resolution：1bpm

Accuracy:±2bpm

TEMP（Optional）：

Channel：1

Input: Body surface thermal-sensitive resistor temperature sensor

Range: 0℃～50℃

Resolution：0.1℃

Accuracy ±0.2℃

6. Dimension 160mm×148mm×85mm

7. Net Weight 420g