Parameters：

Two Parameters：NIBP, Pulse Rate.

Waveforms：

No Waveform

Features：

1. Compact, small, light, easy for carrying and handling

2. LED and LCD display

3. Audio and visual alarm with freely set limit

4. Storage and review of patient’s data up to 900 groups which is never lost even when power’s off

5. Two kinds of reviewing the data: In list or in single group.

6. Three kinds of power supply, AC Power, Build-in rechargeable Ni/MH battery and Common AA alkaline or rechargeable batteries

7. Automatic power-off without signal for 10 min.

8. Patient’s trend can be transmitted to a personal computer for display，saving and printing

9. Suitable for adult and pediatric

Applications：

NIBP Patient Monitor can be applied in the hospital’s operation room, ICU, clinic section office, Out-patient department, sickroom and emergency treatment.

Standard Packing List：

NBIP Patient Monitor main unit 1pc

NIBP extension tube 1pc

Adult NIBP cuff 1pc

AC power adaptor 1pc

Communication cable 1pc

The operator’s manual 1pc

Selectable Accessory:

Child NIBP cuff

Specifications:

1. NIBP:

Patient: Adult and Pediatric

Measurement method: Oscillometric

Range：Adult:30mmHg~255mmHg  Pediatric: 30mmHg~160mmHg

Measurement unite: mmHg/kPa selectable

Measurement mode: Manual, Auto, STAT

Measurement Type: SYS, DIA, MAP

Measurement interval in AUTO mode:1,2,3,5,10,15,20,30,60,90Min

Measuring period in STAT mode: 5 Min

Resolution：1mmHg

Over-pressure protection：Adult:300mmHg   Pediatric:220mmHg

2. PR:

Range：30bpm~250bpm

Resolution：1bpm

Accuracy:      ±2bpm

3. Alarm

Mode: Audio and visual alarm, the measurement and LED light flash, and the speaker sounds the alarm.

Setup: High and low alarm limits adjustable.

4. Storage and Review

900groups data with corresponding date and time.

5. Display Mode

Type: 128×64 dot matrix homochromy LCD and LED

Backlight color: White

LED Light: Dual-color LED (red/green) and homochromy LED

6. Environment

Temperature

Operation：0°C~45°C  

Transportation and storage：-20°C~60°C

Humidity

Operation: 15%~95 %( non-condensing)  

Transportation and storage: 10%~95% (non-condensing)  

Altitude

Operation：86kPa ~106kPa

Transportation and storage：50kPa~106kPa

7. Power Requirements

AC power adaptor      

Input: AC 100～240V, 50/60Hz, 0.7A

Output: DC 8.4V，1A

Internal battery             

Type: 1.5Ahr/8.4V Li rechargeable battery

Operating Time: 15 hours of stand-by time with a full battery.

Recharge time: 5 hours

8. Dimension 160mm×148mm×85mm

9. Net Weight 560g